Description: After the air is heated and purified, it is introduced from the lower part by the draft fan, through the hole plate of the hopper
Category: Boiling Dryer
Detailed description:
principle: After the air is heated and purified, it is introduced from the lower part into the hole plate of the hopper. In the studio, the formation of fluidized by the stirring and negative pressure, the rapid evaporation of water with the exhaust away, the material quickly dry.
● medicine, food, feed, chemical and other areas of wet granules and powdery materials dry.
Large particles, small pieces, viscous granules.
● konjac, polyacrylamide and other dry volume changes in the material.
Features:
● fluidized bed for the circular structure, to avoid dead ends.
● Hopper set to stir, to avoid the formation of damp material and dry ditch flow.
● The use of dump dump discharge, convenient and rapid, can also be designed as required automatic access to the material system.
● closed negative pressure operation, the gas through the filter. Easy to operate, easy to clean, is in line with "GMP" requirements of the ideal equipment.
● Drying speed, temperature uniformity, each batch of drying time is generally 20-30 minutes.
Technical Data Sheet:
project
unit
model
Feeding
kg
60
100
120
150
200
300
500
Fan
Air volume
m3/h
2361
3488
4000
4901
6032
7800
10800
Wind pressure
mmH2O
594
533
533
679
787
950
950
power
kw
7.5
11
15
18.5
22
30
45
Stirring power
kw
0.55
0.55
0.55
0.55
0.55
1.5
2.2
Stirring speed
r.p.m
11
Steam consumption
kg/h
141
170
170
240
282
366
451
Operating time
min
15-30（Depending on the material）
Host height
Square
mm
2750
2850
2850
2900
3100
3300
3650
Round
mm
2700
2900
2900
2900
3100
3600
3850
Note: part of the parameters of the design as the different materials have been adjusted to design.
Please indicate the source（：http://www.pfdrying.com/pro_show.asp?id=720)
张经理 13921078219
QQ客服
pfdrying@126.com
干燥设备选型
scanning 
