Description: The machine is fully enclosed, all parts are made of stainless steel, with a three-stage purification device
Name: ZYG series of traditional Chinese medicine extract spray dryer
Category: Spray Dryers
Detailed description:
Overview: The machine is fully enclosed, all parts are made of stainless steel, with three purification device, filtered air up to 100,000 requirements. Simplified and top with a cold wall device, so that wall temperature <80 ℃, the material on the wall is not coking deterioration of the phenomenon, greatly increasing the rate of harvest (up to 95%), and will not produce mixed phenomenon and sticky wall phenomenon.
Basic principles: Chinese medicine extract High-speed centrifugal spray device is centrifugal spray drying technology in the application of specific materials drying, but also the use of high-speed centrifugal atomizer to disperse the material into mist, with hot air full contact to complete the instant dry, Forming a dry product of powdery product.
Chinese medicine extract special dryer is designed to solve the traditional Chinese medicine extract and the plant to collect liquid spray dryer, which solves the material in the original LPG high-speed spray dryer in the traditional Chinese medicine extract dry in the following situation:
1. Material sticky wall, the yield is low;
2. Material in the wall to stay a long time, resulting in coking material deterioration phenomenon
Difficult to clean, do not meet GMP requirements;
4. Low output: LPG-150 spray dryer, the output can only handle 50-60Kg / h liquid.
In view of the above situation, our factory according to the nature of Chinese medicine extract and process requirements of the design of the traditional Chinese medicine extract dry machine problems, dry material color is good, no deterioration, greatly improving the economic benefits of the factory, Chinese medicine extract and LPG high-speed Centrifugal spray dryer compared to the following characteristics:
1. The use of three air purification, so that the wind reached 100,000 requirements;
2. The use of a cold wall device, so that the wall temperature reaches 80 ℃, the material is not coking on the wall;
3. The whole volume is 3.5 times the original LPG standard centrifugal spray.
4. The use of quick-opening flushing device, suitable for multi-species production requirements
5. Dust using a wet dust, so that dust does not go out, in line with environmental requirements;
6. The use of air cleaning device, the effect is more satisfactory;
7. Atomizer using frequency control.
8. Using PLG control, program control system screen display;
9. Can be equipped with flushing device; 10. Can be equipped with dry air sealed transport.
Technical Data Sheet:
model
ZYG-25
ZYG-50
ZYG-80
ZYG-100
ZYG-150
ZYG-200
ZYG-300
Water evaporation kg/h
25
50
80
100
150
200
300
Material handling capacity(kg/h)
25-34
50-68
80-108
100-135
150-203
200-270
300-406
Finished product content(kg/h)
4.8-7.2
9.2-14
14.8-22.4
18.4-28
24-42
36.8-56.4
55-85
Wet material solid content(%)
18-25
Finished product moisture content(%)
3-5
Electric power(kw)
63
99
132
153
204
246
330
Heating source
Steam + electricity
Product capture mode and efficiency
Secondary cyclone or a cyclone dust collector and a wet dust collector ≥ 95%
Automatic control instrument
Hot air temperature and exhaust temperature instructions, automatic adjustment of temperature controller
Air inlet temperature (℃)
150-200
Exhaust temperature (℃)
80-100
Dimensions
(mm)
L
7000
8000
9800
11000
12200
14100
15000
W
4000
5000
5700
6200
7000
7800
9000
H
6900
7400
8000
8900
10000
11000
12000
Note: part of the parameters of the design as the different materials have been adjusted to design.
Please indicate the source（：http://www.pfdrying.com/pro_show.asp?id=704)
张经理 13921078219
QQ客服
pfdrying@126.com
干燥设备选型
scanning 
