Drying Equipment Customer Selection Feedback Form

Please fill in the form in detail so that our company can provide careful selection recommendation

                                        Company name：    Zip code：

                                        Address：

                                        Customer Name：    Duties：

                                        Company phone：    FAX：

                                        E-mail：    Web：

1.Material name：  Molecular formula：  PH：

2.The shape of the dry material：  Powder    Powder    Particles    Block    Flake    Slurry    Filter cake    Paste    Paste    Solution    Fibrous    Emulsion    Suspension

3.Other features of the material：  Flammability    Explosive    Agglomeration    Smell   其他 

4.The name of the media being evaporated：  Molecular formula：  PH：  The boiling point of the medium being evaporated： ℃ ；
Whether it needs to be recycled: YES  NO 

5.The initial moisture content of the material：% ；  Which contains crystal water：   ； Require moisture after drying：% ；
Requires surplus crystal water：

6.Material initial temperature：℃ ；  Require the temperature after drying：℃。  Whether to use the cooling receipt：

7.The maximum temperature at which the material is dry: ℃；The optimum temperature range when the material is dry: ℃

8.Softening temperature of the material: ℃；The melting point of the material: ℃

9.The specific heat of the material: KJ/kg. ℃；The thermal conductivity of the material: KJ/m2.h. ℃

10.The true density of the material: kg/m3，The bulk density of the material: kg/m3

11.Material particle size distribution range: mm (mesh) to mm（mesh）；Proportional content≥ %
Where: maximum granularity mm(Mesh); proportion content≥ %
Minimum particle size: mm(Mesh); proportion content≥ %

12.Requires dryness of the finished product after the particle size requirements: mm（Mesh）

13.Viscosity in the original state of the material: Cough (cp)；heating whether the mouth to reduce the viscosity: YES 、NO

14.Dry material when the shape can be destroyed: can Can not

15.Product output after drying: kg/h （Or wet material handling capacity: kg/h）

16.Drying requirements:  Continuous drying 、  The gap is dry 、  Dynamic drying 、  Static drying 、  Hot air drying 、  Vacuum drying 、  Microwave drying 、other:

17.Drying methods of past dry methods or similar products : Want to use the dryer model:

18.Entry requirements: Natural folk songs , 30 million filter, 10 million filter, 1 million filter, other:

19.User requirements for drying equipment: Material contact is stainless steel 、 All stainless steel 、 Titanium 、 Aluminum alloy 、 Carbon steel 、 Glasses 、 Tetrafluoroethane 、 other:

20.Intended to use stainless steel models: SUS304 , SUS321 , SUS316 , SUS316L, SUS2235 , other:

21.Material recovery rate requirements：≥ %；Dust environmental protection requirements：≤ mg/nm3 ；Emission requirements for waste gas：≤ mg/nm3；Waste water, waste maximum allowable emission requirements≤ mg/L

22.Drying process used in the heat medium and heat source: hot water ℃ ; steam Mpa; Heat transfer oil ℃； Electric heating 、Hot air stove 、
Fuel hot stove 、Gas hot air stove 、other:

23.Heat medium and heat source: own 、Buy separately 、Supporting procurement 、other:

24.Equipment cleaning and hygiene requirements：

25.Equipment used: 、altitude: 、humidity: 、Maximum temperature: 、lowest temperature: 、Average annual temperature: 、other:

26.Budget investment for optional equipment (RMB): Million yuan

27.other requirements：