Overview:
SZG double cone vacuum dryer is my factory in the combination of similar products with the development of a new generation of drying equipment, SZG double cone vacuum with belt, chain two elastic connection, and thus equipment running smoothly. Specially designed tooling, fully embodies the good balance of the two shafts, the heat medium and the vacuum system all use reliable American technology rotary joint. On this basis, we developed the SZG-A, which can be stepless speed regulation, but also for constant temperature control. As a professional drying equipment factory, we serve more than 100 units per year, the factory products from high temperature heat transfer oil for the medium, medium temperature steam and low temperature hot water readily available. Dry sticky material, the factory will be in the tank for your special design "copy board" institutions or set the ball.
principle:
• Heat energy (such as hot water, low pressure, steam or heat transfer oil) in the enclosed interlayer, and the heat is transferred to the dried material through the inner shell.
● In the power-driven, the tank for the slow rotation, the tank material constantly mixed, so as to achieve the purpose of strengthening the dry.
● The material is in a vacuum state. The vapor pressure drops so that the moisture (solvent) on the surface of the material reaches a saturated state and evaporates and is discharged from the vacuum pump. Material within the water (solvent) to the surface of the infiltration, evaporation, discharge, three processes continue, the material in a very short period of time to achieve the purpose of drying.
Features:
● oil heating, the use of automatic temperature control, you can dry biochemical products and mineral raw materials, the temperature can be between 20 ~ 160 ℃.
● high thermal efficiency, than the average oven to improve more than 2 times.
● indirect heating, the material will not be contaminated, in line with "GMP" requirements. Equipment maintenance is simple, easy to clean.
application:
(Such as biochemical products, etc.), more suitable for easy oxidation, volatile, heat sensitive, strong stimulation, the use of chemical, pharmaceutical, food and other industries powder, granular and fibrous material concentration, mixing, drying and low temperature drying materials (such as biochemical products, Toxic materials and materials that are not allowed to break the crystals.
Technical Data Sheet:
project |
unit |
Models |
name |
Unit |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
Total volume |
L |
100 |
200 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
4000 |
5000 |
Working volume |
L |
50 |
100 |
175 |
250 |
375 |
500 |
750 |
1000 |
1500 |
2000 |
2500 |
Heating area |
m2 |
1.16 |
1.5 |
2 |
2.63 |
3.5 |
4.61 |
5.58 |
7.5 |
10.2 |
12.1 |
14.1 |
Rotating speed |
Rpm |
6 |
5 |
4 |
4 |
4 |
power |
Kw |
0.75 |
1.1 |
1.5 |
1.5 |
2 |
3 |
3 |
4 |
5.5 |
7.5 |
7.5 |
Rotation height |
mm |
1810 |
1910 |
2090 |
2195 |
2500 |
2665 |
2915 |
3055 |
3530 |
3800 |
4180 |
Total Weight |
kg |
825 |
1050 |
1350 |
1650 |
1800 |
2070 |
2250 |
3000 |
4500 |
5350 |
6000 |
Tank design pressure |
Mpa |
-0.09~0.096 |
Sandwich design pressure |
Mpa |
0.3 |
Motor can be selected according to user requirements speed motor, speed 0-6rpm
The maximum capacity of the machine can be designed to 10000L
|
|