Overview:

     The machine is a continuous drying device for the flow, for the permeability of the flake, strip, granular material drying, for dehydrated vegetables, Chinese medicine Pieces and other high water content, and the temperature does not allow high material is particularly suitable The dryer has the advantages of fast drying speed, high evaporation intensity and good product quality. It can be dried after granulation or granulation of deodorized cake-like paste.

● can adjust the amount of air, heating temperature, material retention time and feeding speed to achieve the best drying effect.

● Flexible configuration of the equipment, the use of mesh belt flushing system and material cooling system.

● Most air recycling, highly energy saving.

● unique sub-wind device, so that the distribution of hot air more uniform, to ensure consistency of product quality.

● heat source can be used steam, heat transfer oil, electricity or coal (oil) hot air furnace supporting

principle:

     The material is spread evenly on the mesh belt by the feeder, and the mesh belt is generally made of 12-60 mesh stainless steel wire and is moved by the transmission in the dryer. The dryer consists of several units, each unit of hot air independent cycle, part of the exhaust by a special exhaust fan discharge, exhaust gas control by the control valve, the heat from bottom to top or from top to bottom through the material filled with the network to complete the heat and Quality of the transfer process, take away the material moisture. The mesh belt is slowly moving, the running speed can be adjusted according to the material temperature freely, and the dried finished product falls into the feeder continuously. Up and down the cycle unit according to user needs can be flexible equipment, the number of units can also be selected according to need.

application:

     Dehydrated vegetables, pellets feed, monosodium glutamate, coconut, organic plastics, synthetic rubber, propylene fiber, pharmaceuticals, herbs, small wood products, plastic products, electronic components aging, curing and so on.

Technical Data Sheet: