Double Cone Rotary Vacuum Dryer for Positive Pressure Press and Drying Two Function Product Overview

ZSG-double cone rotary vacuum dryer is a new generation of drying equipment developed by our factory in combination with similar domestic technology. The double cone vacuum adopts belt-chain two elastic connection mode, so the equipment runs smoothly. Specially designed process, fully embodies the good balance of the two shafts, heat medium and vacuum systems are using a reliable mechanical seal or US technology rotary joint. On this basis, we developed the SZG-A it can stepless speed control, but also for constant temperature control.

As a professional drying equipment factory, factory products from high temperature heat transfer oil for the medium, medium temperature steam and low temperature hot water readily available. Dry sticky material, the factory will be in the tank for your special design "copy board" institutions or set the ball.

Principle of SZG Series Double Cone Rotary Vacuum Dryer

◎ in the closed mezzanine through the introduction of thermal energy (such as hot water, low pressure steam or heat transfer oil), heat through the inner shell to be dry material.

◎ in the power-driven, the tank for the slow rotation, the tank material constantly mixed, so as to achieve the purpose of strengthening the dry.

◎ material in a vacuum state, the vapor pressure drop on the material surface of the water (solvent) to saturation and evaporation, and timely discharge by the vacuum pump recovery. Material within the water (solvent) to the surface of the infiltration, evaporation, discharge three processes continue, the material in a very short period of time to achieve the purpose of drying.

◎ double cone vacuum dryer can be designed positive pressure filter, filter and then heated dryer, a set of equipment using two sets of technology to complete.

Adapt to material

For chemical, pharmaceutical, food and other industries powder, granular and fiber concentration, mixing, drying and low temperature drying materials (such as biochemical products, etc.). More suitable for easy oxidation, volatile, heat sensitive, strong stimulation, toxic materials and does not allow the destruction of the crystallization of the material. Features ◎ oil heating. Using automatic temperature control. Can be dried biochemical products

◎ and mineral raw materials, the temperature can be between 20 ~ 160oC.

◎ high thermal efficiency, than the average oven to improve more than 2 times. ◎ indirect heating. Material will not be contaminated, in line with "GMP" requirements, equipment maintenance is simple, easy to clean.