Chinese medicine Pieces drying project

project description:

Chinese medicine Pieces of dry way directly related to the quality of Pieces, before drying with the sun room is consistent with the certification requirements and can reduce costs, but a small number of enterprises in the solar room design is not reasonable, one area is small, can not meet the production requirements. Second, the facilities of the sun room is not perfect, only dust-proof function, no matching ventilation, dehumidification, shelves and other devices, slow drying speed. The company according to the characteristics of traditional Chinese medicine Pieces designed to meet the traditional Chinese medicine Pieces of the belt dryer, the use of belt dryer equipment to dry slices, free from climate, than the natural dry health, and can shorten the drying time, but also mass production The

 

Device Description:

The belt dryer consists of the feeding system, the cloth system, the air inlet filtration system, the heating and cooling system, the main engine, the transmission system, the bypass filtration system, the discharge system, the exhaust ventilation system, the control system and so on. Work, by the feed system feed to the fabric system, the material added to the belt dryer, the material and through the network through the flow of hot air, cold wind meet, heat transfer, mass transfer, hot air recycling to make energy more Low, up to a certain degree of humidity, the part of the forced drainage away the water, the material to complete the dry and cooled.

 

Features:

1, hot air inlet temperature through the ratio control valve display control, thus controlling the inlet temperature within the set range.

2, the network speed adjustable frequency to ensure that the material retention time, but also to ensure the quality of the material.

3, transmission motor, stirring motor, adjustable fan adjustable fan.

4, with the bottom of the machine with the bottom of the tape made of inclined, so that the material collection, cleaning.

5, the equipment is completed, the transmission system test run, no abnormal sound and jamming.

6, with a stirred silo on the set of ultrasonic level detector, to ensure a reasonable level, with the previous section of the transmission line, so that the production line more fluid.

7, the cabinet on the various parts of the door insulation is good, sealed, and open and close convenient.

8, each unit on both sides are equipped with cleaning and maintenance doors, you can directly rinse the internal equipment.