Catalyst special dryer

 

First, the project overview

Catalyst is an important product of the chemical industry, widely used, the production of catalyst from the granulation, drying, calcination and other technical indicators are very high, according to the characteristics of the industry, after many years and Sinopec extensive contact and technical research, The successful development of a variety of production catalyst for the complete set of drying equipment, to meet the production requirements of various production, access to a wide range of users to evaluate, become China Petrochemical system designated suppliers.

 

Second, the project advantages

A) treated as a catalyst for the material before and after drying the temperature can be different, sub-section of the temperature, the operating temperature per unit can be independently controlled. The actual operation can be adjusted according to the material drying conditions.

B) Each drying unit uses a combination of hot air circulation, fresh air supplement, and wet air discharge to reduce energy consumption.

C) In order to facilitate the timely detection of the material on the mesh belt, each drying unit has two observation sampling ports.

D) network bandwidth is large, so pay attention to the distribution of hot air to ensure product quality and stability. At the same time to ensure that all the hot air through the material to prevent air leakage.

E) Belt on both sides of the belt comes with movable baffle plate to prevent material rolling. In order to increase the strength of the mesh belt, the use of double-layer network, the following use of coarse wire as the force layer, the use of filaments above the stacking material layer. That is, the upper mesh mesh specifications mesh 24 mesh (diameter less than 1.0mm), the lower support network 8 head;

F) In order to improve the drying effect, the system uses the large air volume centrifugal fan as the hot air circulating fan, can increase the hot air through the material layer wind speed, improve the drying rate.